Essential Two Wheeler Repair and Maintenance You Can Do Yourself
DIY bike maintenance tips for beginners. When it comes to the protection of bikes, just having a reliable insurance policy is not enough. In fact, there is a lot more than they require on a regular basis.
When it comes to the protection of bikes, just having a reliable bike insurance policy is not enough. In fact, there is a lot more that they require on a regular basis.
This article contains some tips to master your bike's maintenance.
Also Read: Bike Insurance Details by Registration Number
Essential Two Wheeler Repair and Maintenance You Can Do Yourself
As a little do-it-yourself maintenance could not only keep your beauty safe but also save you money. So, here is what you can do.
1. Check Air in Tyres
Before starting a ride, you must check the tyre pressure before starting the ride as over a period of time, tyres tend to lose pressure. Hence they need to be refilled at regular intervals. Refilling in bike tyres can be done at the petrol pump by paying a tip. Ensure that the front and rear tyres have optimum level pressure. This is because fully inflated tyres increase the fuel efficiency of the motorcycle.
2. Lubricate Chain And Sprocket Regularly
The chain of your bike may become loose over a period of time. But as the chain, along with the belt and the shaft send power from the transmission to the rear wheel, it needs to be well maintained so as to ensure a smooth ride. The motorcycle chain should be cleaned and lubricated regularly. You can clean the chain with a hard paint brush and remove the accumulated dirt and apply the lubricant. This will keep the chain smooth and ensure its carefree running.
Also Read: Fine for Driving Two Wheeler Without Insurance
3. Change Coolant
Coolant prevents the engine of your bike from overheating, over heating, or getting corroded. So, you should keep a check on the coolant level of your bike and change it whenever it seems necessary. To change the coolant, you should remove any vital bodywork to get access to the coolant drain bolt and place a drain pan below the engine and remove the bolt. Remove the radiator cap to ensure everything drains. After the process, reinstall the drain bolt. Use a funnel to fill the coolant in the appropriate quantity and then put back the radiator cap. Check the coolant level when the engine has been cooled. Add more coolant if required, as per the owner’s manual.
4. Replace Engine Oil
It is extremely important to change your bike’s oil as it lubricates the engine thereby reducing the friction between the parts. These days, many bikes come with a dipstick that keeps the riders informed about the minimum and maximum oil levels in it. Otherwise, you should keep checking the level and get it replaced when it reaches the minimum level. Generally, it is recommended to change the engine oil after 3 months.
5. Check the Battery Regularly
If you do not maintain your bike’s battery, then it may turn in to be a very costly affair. If you do not feel confident enough to handle your bike’s battery, then you can take help from an experienced rider or a mechanic. Also, before starting the bike, look out for battery leaks or blown fuse. In case you do not have to ride the bike, you can remove the battery and store it on a wooden surface or cardboard.
Must Check
Two Wheeler Insurance Companies
Also Read
How To Increase Concentration While Riding Your Motorcycle?
Benefits of Buying Long-Term Two Wheeler Insurance
Takeaway
Once you make it a habit to check the above mentioned things, it will take just a few minutes to determine if there is any problem with your bike or not. It is always advised to solve the problem before starting the journey otherwise you may end up getting stuck in the middle of the road later.
Disclaimer: This article is issued in the general public interest and meant for general information purposes only. Readers are advised not to rely on the contents of the article as conclusive in nature and should research further or consult an expert in this regard.
